
Ready for fast-paced and intense racing, the Nukeproof Dissent 297 Alloy Mountain Bike Frame is now available as a Mullet bike with a 29" front wheel and a 27.5" rear wheel.
Model Year: | 2021 |
---|---|
Frame: | Nukeproof Dissent 297 Alloy, 200mm Travel |
Fork: | Fork Travel: 200mm |
Steerer: | Other |
Bottle Cage Mounts: | None |
Wheel Size: | 27.5"/29" |
Brakes: | 200mm Direct Post |
Seat Post: | 30.9mm |
Tyres: | Max Tyre Size: 2.5" |
Frame Weight: | 5.06kgs/11.1lbs |
MTB: | Yes |
Brand new for MY21; the Dissent is now available as a Mullet bike with 29” Front wheel and 27.5” rear wheel!
“It makes me want to race some World Cups again" - Sam Hill
Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world’s fastest racers.
The new DISSENT platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes we wanted to make were:
· Simplify the design, to drop the weight and increase the front triangle stiffness.
· More progressive leverage rate to increase the mid-stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride.
Structurally the most obvious change is an all-new suspension design for the DISSENT. In a move away from the Fallout Linkage; The new DISSENT’s rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time.
The suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse.
The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, we created something much better than expected, and the prototype won on its international debut at Crankworx festival’s Garbanzo Downhill race with Sam Hill.
It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The DISSENT takes this into account with an adjustable main pivot flip-chip, designed to essentially work like a bottomless token for a coil shock. The DISSENT Frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate.
The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider!
Further custom tuning can be done via our new 3 position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you’re riding, your height or riding style.
The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, confidence-inspiring 63-degree head angle and 200mm of travel via our new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensures optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157mm x 12mm rear axle to keep things stable at the rear.
Frame: Nukeproof Dissent 297 Alloy, 200mm Travel
Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (M=350LBS/L=400LBS /XL=450LBS SPRING)
Headset: Nukeproof, 49IITS
Custom-tuned rear shock configuration
Internal cable routing
Enduro Bearings
Threaded 83mm BB
Boost 157mm rear axle spacing
3D contoured frame protection
Three-stage Dissent linkage
4 position adjustable linkage progression chip system
3 Position adjustable chainstay length
Weight: 5.06kgs/11.1lbs
Material: Hydroformed 6061 Triple-Butted Aluminium
Size: M/L/XL
Fork Travel: 200mm
Axle to Crown: 602mm
Fork Offset: 46mm
Rear Travel: 200mm
Wheels Size: Front: 29" Rear: 27.5"
Max Tyre Size: 2.5"
Recommended Shock Sag (Measured standing): 30% (22.5mm)
Shock Size: 250x75mm
Shock Hardware F: 25x8mm
Shock Hardware R: 30x8mm
Headtube: 49mm Semi-Integrated
Headset: ZS49-28.6 / ZS49/40
Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX
Seatpost: 30.9mm
Seat Clamp: 34.9mm
BB: Threaded 83mm BSA
Rear Hub: Boost 157x12mm
Rear Axle: Nukeproof M12x1.75 198mm
Chain Guide: ISCG05
Brake Mount: 200mm Direct Post
Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS
Nukeproof- It’s an attitude. Originating from Grand Rapids, Michigan in 1990, Nukeproof is now based in Belfast, Northern Ireland. Nukeproof’s aim has always been to design innovative and desirable performance-enhancing products for today's mountain bike gravity rider. Nukeproof products are designed for and tested by the worlds fastest riders to ensure that they are ready for the trails and you. Nukeproof has won numerous media and industry awards and has a successful history in mountain bike racing. In 2017 Sam Hill took his Nukeproof Mega 275c equipped with Nukeproof components to the overall Enduro World Series title to add to victories and podiums in the UCI Downhill World Cup. Whatever you're looking for, should it be technical ride wear, upgrade components or a gravity focused bike, Nukeproof has you covered.
Nukeproof Dissent 297 (2021) | ||||
---|---|---|---|---|
Medium | Large | Extra Large | ||
1. Reach | mm | 440mm | 460mm | 480mm |
2. Stack | mm | 631mm | 631mm | 631mm |
3. Top Tube | mm | 590mm | 610mm | 630mm |
4. Seat Tube Length | mm | 405mm | 405mm | 405mm |
5. Seat Tube Angle | Degrees | 76° | 76° | 76° |
6. Head Tube | mm | 110mm | 110mm | 110mm |
7. Head Tube Angle | Degrees | 63° | 63° | 63° |
8. Chainstay Length | mm | 435 - 445mm | 435 - 445mm | 435 - 445mm |
9. Front Centre | mm | 814mm | 834mm | 854mm |
10. Wheelbase | mm | 1254mm | 1274mm | 1294mm |
11. Bottom Bracket Drop | mm | -20mm | -20mm | -20mm |
12. Bottom Bracket Height | mm | 358mm | 358mm | 358mm |
13. Standover Height | mm | 678mm | 677mm | 676mm |
14. Fork Travel | mm | 200mm | 200mm | 200mm |
The delivery options available for shipping this product along with the contents of your basket to United Kingdom are:
Wiggle ships to over 100 countries. To see what delivery options are available for other destinations you can update your delivery destination via the International Options feature at the top right of the website.
Goods are shipped from the UK. Does not include delivery charges, local taxes or import duties, if applicable.
More information on International delivery options
We will happily refund any item purchased on Wiggle if returned to us within 365 days; excluding Wiggle gift vouchers, nutrition and customised products, except when faulty.
Please note: Bikes and other bulky items cannot be returned using our local returns service (where applicable). Please contact us and we can arrange to collect these from you using our discounted courier rates. There is a fee for all collections, except for faulty products.
Returned goods must be unused and supplied with their original packaging, unless the goods are faulty. Wiggle will pay the return postage costs for any faulty items.Only 4 products can be compared at once. Adding this product will remove the product you added to the list first.
Do you want to continue?